Product Description
Type Fountain Pen
Product Name Parker 61 Signet
Manufacturer and Year Parker, US -- 1959-62, these are the years this design in this model were produced.
Length 5-5/16"
Filling System The fountain pen has the capillary filling system which is unique to this model.
Color 1/10 12k Gold filled body and cap. The gold is in the parallel lines pattern. The section on the fountain pen is black. The pen has pearlescent cap and barrel jewels.
Nib Medium Gold Nib. It is unlabeled but looks like a medium. Very smooth with lots of tipping material.
Condition Excellent condition, both cosmetically and functionally. No scratches or personalization. The barrel and cap are excellent. The arrow inset in the section is in good condition and looks like it might have been replaced or re-installed. The pen has polishing marks with some plating wear on the ends and edges. We cleaned and tested the filling system, and got good ink flow. You'll need to be patient when you fill it the first time, as it takes about a half hour for the capillary system to suck in enough ink to get started after it's been left dry for a time.
A word or two about the Parker 61 Capillary Filling System. If you are not familiar with this unique design, you should read this.
Here is how you fill a Parker 61, and an insight into how the pen actually works. Unscrew the barrel and stick the back end of the pen (aka the capillary cell) into a bottle of ink. Wait a few minutes (probably more like a half hour when you first start one of these older used ones), and let the ink wick up into the capillary cell. The cell contains a sheet of perforated plastic that has been given a 3-D pattern resembling tire tread, and rolled up. The perforations allow ink to seep between the rolled-up layers, and the tread pattern maintains space between the layers. In the middle of this tube, which runs the entire length of the capillary cell, is the feed. To keep things clean, the capillary cell has on a coating of teflonon the outside that is intended to shed ink as the user withdraws the pen from the ink bottle, leaving very little ink to be wiped off. The end of the barrel contains a spring-loaded thingey which covers the open end of the capillary tube, but still allows it to vent.
